POSIC
FR | DE | EN    Back home OK     Site map     Imprimer Print    
  You are here :  Homepage > Products > Rotary Encoders > ID4501C Dual Channel Encoder Kit
About Posic
Technology
Products
Linear Encoders
Rotary Encoders
    2-Chan. A quad B ID4501C
    2-Chan. A quad B ID1102C
    3-Chan A quad B + I IT3402C
Gearwheel Encoders
WebStore
News
Contact info
ID4501C Dual Channel Encoder Kit

Features

ID4501C incremental encoder with codewheel

  • Highly miniaturized rotary encoder
  • Differential inductive sensing principle
  • Insensitive to magnetic interference fields
  • Robust against dust, particles, oil, grease, humidity, liquids 
  • Ultra-thin profile: 0.9 mm
  • Optional with cable, connector and holder/baseplate 
  • Hollow-shaft codewheel with inner diameter up to 18 mm, outer diameter 28.2 mm 

Applications

Technical drawing ID4501C

  • Brushed and brushless motors
  • Industrial automation
  • Robotics
  • Laboratory automation
  • Office automation
  • Pumping and dispensing equipment
  • Medical devices
  • Rotary stages


Key specifications

Schematic diagram ID4501C
Output signals A quad B 
Phase shift 90 +/- 45°
Duty Cycle 180 +/- 50°
Resolution 128 - >1'000'000 CPR
Maximum speed depends on codewheel and resolution, see table below
Supply 5.0 +/- 0.5 V, 10 mA typ.
Temperature -20 to 100°C
Airgap Nominal 0.2 mm, max 0.6 mm

Codewheels

ID1102C with three Codewheels
 Codewheel type TPCS01 TPCS02 TPCS03
 Number of periods

 64

 128

 180

 Inner diameter

 12 mm

 36 mm

 56 mm

 Outer diameter

 28.2 mm

 52.7 mm

 72.55 mm

 Readout radius

 12.2 mm

 24.45 mm

 34.38 mm

 Lowest resolution,

 highest speed

 128 CPR

up to 23'000 RPM

 256 CPR

up to 11'000 RPM

 360 CPR

up to 8'000 RPM

 Highest resolution,

 lowest speed

 >1'000'000 CPR

up to 45RPM

 >2'000'000 CPR

up to 22 RPM

 >2'000'000 CPR

up to 16RPM

Codewheels with other dimensions and custom codewheels are available upon request.

Evaluation and Programming Tool

Evaluation and Programming Tool

The evaluation and programming tool consists of an interface board and a software that allow you to:

  • Evaluate a POSIC encoder and compare it with a reference encoder
  • Program the resolution
  • Program an encoder identification number
  • Program a LookUp Table for linearization

 

Go to the Evaluation and Programming Tool page



Buy rotary encoder kits and the corresponding Evaluation & Programming Tool in ourwebstore at www.posic.weebly.com/store

 

Downloads

Datasheet
 Document PDF
 ID4501C-Rotary-Encoder-Kit.pdf
   563.28Ko

Evaluation and Programming Tool
 Document PDF
 EPT-POSIC-Evaluation-Programming-Tool.pdf
   442.44Ko

-----------------------------------
 
 
   

3D drawings in STEP format
 
 
   

Encoder
 Document
 POSIC-4501.STEP
   397.1Ko

Encoder on holder A
 Document
 POSIC-4501-Holder-A.STEP
   2.55Mo

Codewheel with 180 periods
 Document
 POSIC-TPCS03.STEP
   6.02Mo

 
 
© 2017 Arcantel SA. All rights reserved - An Internet Solutions by Arcantel SA
Retour Homepage