Overview of POSIC's incremental encoders

Click on the link below to download a 2-page overview of POSIC's incremental encoders
POSIC_Incremental_Overview_V1A.pdf 736.85Ko

IS2201 Single Channel Sensor with Analog Output

Output signal: differential analog
Targets: ferromagnetic and/or electrically conducting gears, slotted discs, strips, edges of metallic objects, ...

Go to product page IS2201

IS1101 Single Channel Sensor with Digital Output

Output: digital

Targets: ferromagnetic and/or electrically conducting gears, slotted discs, sheet metal bands, edge detection on metallic objects

Go to product page IS1101

ID1101L Dual Channel Encoder + Linear scale bundle

Output: A quad B
Linear scale: Up to 200 mm
Resolution: 0.3 mm down to 0.3 um
Speed: up to 40 m/s
Airgap: up to 0.7 mm

Go to product page ID1101L

ID1101C Dual Channel Encoder + Codewheel bundle

Output: A quad B
Codewheel: ID 7.0 mm, OD 28.2 mm
Resolution: 9 - 14 bits = 128 - 4096 CPR
Speed: from 2'500 RPM at 14 bits up to 40'000 RPM at 10 bits or lower resolution
Airgap: nominal 0.2 mm, max up to 0.7 mm

Go to product page ID1101C

ID1101G Dual Channel Encoder for Gearwheel sensing

Outputs: A quad B
Target: gear module 0.4 - 0.7
Interpolation: binary from x1 to x64
Input frequency: up to 40 kHz
Output frequency: up to 200 kHz
Airgap: nominal 0.2 mm, up to 0.7 mm

Go to product page ID1101G

IT3401 Triple Channel Incremental Encoder Kit

Outputs: A quad B and Index
Targets: Linear and rotational PCB targets
Resolution: 0.3 - 300 um
Speed: 0.1 - 50 m/s
Airgap: up to 1 mm

Go to product page IT3401

For further information about standard products, about custom product development or about old products (PO-series), please contact POSIC or one of our distributors or representatives.