Ordering Code

Invalid order code
QtyUnit price
1+$ 180.50
10+$ 156.11
20+$ 143.53
50+$ 126.13
100+$ 113.74


The AP9200L encoder is connected to the Evaluation & Programming Tool EPT via the Module Driver Board MDB001. In addition to the EPT, the Module Driver Board MDB001 must be ordered.


  • Highly miniaturized: 20 x 20 x 3.9 mm
  • Output SSI
  • Insensitive to magnetic interference fields
  • Robust against oil grease, liquids, dust, particles
  • Programmable resolution and max speed
  • Optional with holder, cable, and connector

The AP9200L absolute encoder kit consists of an encoder and a linear scale. The encoder consists of two inductive position sensors that read a Nonius scale, a microcontroller that calculates the absolute position and an RS422 receiver/driver that forms the SSI interface. The linear scale is a PCB with passive copper strips arranged in 2 tracks with an unequal number of periods N1 and N2.

Options like the orientation encoder to scale and the maximum speed are field-programmable or can be programmed ex-factory.

Output signals


Absolute stroke

up to 38 mm


down to 73 nm


5V, 30 mA


-20 to 100°C


0.1 – 0.5 mm

Scale type TPLA08 TPLA16 TPLA32
Period length (A) 1.2 mm 1.2 mm 1.2 mm
Width (B) 7.5 mm 7.5 mm 7.5 mm
Thickness (C) 0.92 mm 0.92 mm 0.92 mm
Absolute Stroke 9.6 mm 19.2 mm 38.4 mm
Scale Length up to 538 mm up to 538 mm up to 538 mm

TPLA08 Linear Nonius Scale with absolute stroke-length 9.6 mm for Absolute Encoders AP3403L and AP5603L

TPLA16 Linear Nonius Scale with absolute stroke-length 19.2 mm for Absolute Encoders AP3403L and AP5603LTPLA16 Linear Nonius Scale with absolute stroke 19.2 mm

TPLA32 Linear Nonius Scale with absolute stroke-length 38.4 mm for Absolute Encoders AP3403L and AP5603L


Technical drawing of the Absolute Linear Encoder AP9200L

Dimensions (mm) of AP9200L encoder twisted-wire flat cable (pitch 1.27 mm) and 8-pin DIN41651 connector.

Absolute Linear Encoder AP9200L

$ 180.50 Unit Price
Total Price

Display price and ordering code for the encoder or for the Evaluation & Programming Tool

Programmable by means of POSIC’s

Evaluation & Programming Tool or

pre-programmed ex-factory

Orientation of the encoder with respect to the scale

See datasheet Table 1

Maximum speed for TPLA-scales

See datasheet Table 2

Binary or Gray code

See Datasheet Table 3

LookUp Table to compensate the periodic non-linearity of the scale

See datasheet table 4

Dual-track Nonius scales TPLA08, TPLA16 and TPLA32

See Datasheet Table 5

Spacer rings for encoder mounting See datasheet table 6

Standard cable: 0 to 100°C

High-temp cable: -40 to 125°C

See datasheet Table 7

See datasheet Table 8

For Evaluation & Programming Tool: 8-pin connector DIN 41651

Select the total number of encoders (The photo always shows 2 encoders independent of the number of encoders selected)

Blue plastic enclosure Protects the Interface Board against mechanical impact and dust/particles


Request for Quote

Ordering Code