We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Ordering Code
Invalid order code
| Qty | Unit price |
|---|---|
| 1+ | $ 247.54 |
| 10+ | $ 215.51 |
| 20+ | $ 198.89 |
| 50+ | $ 175.20 |
| 100+ | $ 158.12 |
Features:
- Highly miniaturized: 20 x 20 x 3.9 mm
- Output SSI
- Insensitive to magnetic interference fields
- Robust against oil grease, liquids, dust, particles
- Field-programmable configuration
- Optional cable and connector
The AP9600C absolute encoder kit consists of an encoder and a codewheel. The encoder consists of two inductive position sensors that read the two tracks of the codewheel, a microcontroller that calculates the absolute position and an RS422 receiver/driver that forms the SSI interface. The codewheel is a PCB with two tracks of passive copper strips.
The Evaluation & Programming Tool allows to configure the encoder, carry out a self-calibration, program the configuration and calibration data in the encoder, record and analyze measurements and carry out self-diagnosis.
|
Output signal |
SSI |
|
Single-turn |
360° |
|
Resolution |
up to 22 bits/rev |
|
Supply |
5V, 100 mA |
|
Temperature |
-20 to 100°C |
|
Airgap |
0.1 – 0.5 mm |
Table with dimensions for the 2-track codewheel TPCA01-044
| Parameter |
Abbreviation |
Value for TPCA01-044 |
|
Outer Diameter |
OD |
28.2 mm |
|
Inner Diameter |
ID |
12 mm |
|
Readout Radius 1 |
RR1 |
8.5 mm |
|
Readout Radius 2 |
RR2 |
12.2 mm |
Technical drawing of the 2-track codewheel.
Dimensions (mm) of AP9200L encoder twisted-wire flat cable (pitch 1.27 mm) and 8-pin DIN41651 connector.
Related Products
Check items to add to the cart or
